Today I have installed a broadband ADSL router to an external pc. The pc was not networked to the college LAN at all, and we used an external telephone port as our means of connection. We firstly installed the router via USB and installed the USB drivers off the CD which came with the router. We then configured the correct IP address via the on board configuration setting on the IP 10.02.02, this was for our internal pc settings. After this we connected to the internet and gained an external I[P in the process. We then reset the router and decided to connect it via Ethernet cable so that if we wanted to connect our pc to a switchboard or a LAN in the future we can do via this method. We followed the previous instructions but used Ethernet instead.The details we used to connect to broadband internet are as follows;
Username: nathanbeardmore2@ic-adsl.co.uk
Password: nb242
The actual router port username and passwords are as follows;
User name: admin
Password: zoomadsl
No comments:
Post a Comment